Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
STEP 2. CHECKING WATER SUPPLY AND ELECTRICAL
REQUIREMENTS
•
The water supply line pressure must be between 0.04-1.0 MPa.
•
Supply cold water only. Make sure that the water temperature does not exceed 60 ˚C.
CAUTION
•
Do not supply hot water. Otherwise, the product may malfunction.
•
Use a rated power of 220-240 V~, 50 Hz.
•
Install the product while the power cord is unplugged.
WARNING
•
Use a power outlet with a maximum allowable current of 16 A. (The maximum current for this dish
washer is 11 A.)
•
When powering the dishwasher, ensure that your power supply has:
-
An 220-240 V~, 50 Hz fuse or circuit breaker.
-
An individual branch circuit serving your dishwasher.
•
After the installation, check if the power cord is not bent or damaged.
•
Ensure that the water supply valve is turned off before connecting the water supply line to the
dishwasher.
•
Seal the water supply line connections using teflon tape or sealing compound to stop any water
leakage.
STEP 3. PREPARING THE CUSTOM PANEL
(FOR FULLY BUILT IN AND SEMI BUILT IN DISHWASHER)
The custom panel should be processed in accordance with the illustrated dimensions.
38
DW5500M_DD81-02437M-00_EN.indd 39
589
566±0.2
451±0.2
A
540±0.2
2-Ø 2( 8)
20(MAX)
A
8-Ø 2( 8)
30
4-Ø 2( 8)
436
A
A-A
Fully built in
A
589
18
6-8
566
6-C1.5
220
36
1.5
8-9.5
1.5
220
A
A-A
Semi built in
Installing your dishwasher _39
2019-04-22
12:48:04
Quicklinks ausblenden:
Werbung
Inhaltsverzeichnis
