Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2 SAFETY INFORMATION
•
This instruction manual must be read carefully and kept in an accessible location for any needs that may
arise.
•
Adjust the stand support feet, when used, in such a way as to obtain the best possible stability.
•
Avoid placing heavy objects upon the loudspeaker, as these can compromise its stability.
•
If the loudspeakers are to be positioned upon a raised support surface (e.g. mezzanines, wooden
boosters, etc.), check beforehand to make sure that the surface is capable of bearing the weight. Also
make sure that there is sufficient friction to prevent the loudspeakers from moving due to the vibrations
from it generated under normal operating conditions.
•
Do not place any objects containing flammable liquids, substances, or liquefiable substances upon the
loudspeaker.
•
Use one of the connection diagrams contained in this instruction manual. The connection of two or more
loudspeakers in parallel can damage your amplifier. If in doubt, contact your dealer.
•
Avoid staying in close proximity to the loudspeakers while the audio system is operating at high volume.
This can cause permanent damage to your hearing. Children must be kept at a safety distance of least
50 cm from the loudspeaker.
•
The speakers generate an electromagnetic field that is harmless to humans and pets, but can
compromise the proper functionality of electronic equipment, such as CRT monitors or TVs, when placed
in close proximity. If this occurs, increase the equipment's distance from the loudspeakers. Do not place
credit cards or other similar magnetic stripe cards on the loudspeaker.
•
The technology underlying the speakers' functionality is based on the principles of electromagnetism,
and the user should therefore avoid operating equipment that generates strong electromagnetic fields,
as these could affect the loudspeaker's proper functionality. Avoid placing transmitting devices such as
mobile phones, cordless phones, intercom systems etc. on top of the loudspeakers.
•
Do not connect the loudspeakers directly to a constant voltage sound distribution system (100 V, 70.7 V
or similar). This could result in a serious system overload, with possible damage to the loudspeaker and/
or the amplifier.
•
Do not place audio cables and electrical power cables in close proximity to one another. An electromagnetic
field is present in the vicinity of the power cables, which can cause an unpleasant humming noise. If this
should occur, move the audio cables and electrical power cables away from each other.
3 INSTALLATION
3.1 UNPACKING
Proceed with unpacking as indicated below, making reference to the images in Chapter 6, Figure 1 A, B, C, D and E:
Respect the following general indications:
•
Use a paper cutter to open the packaging. Do not insert the blade too deep to avoid damaging the contents.
•
Keep all the packaging elements for any future transport operations.
•
Do not wear any watches, bracelets, rings, etc., in order to avoid scratching the loudspeakers and their finishes.
The same care must be taken in order to protect the loudspeakers from any metal elements present on the
clothes you are wearing, such as zippers, buttons, belt clasps, rivets, etc.
Hold the loudspeakers securely with both hands in order to avoid dropping them.
The indicated operations can be performed more safely and conveniently by two people.
The packaging materials can cause pollution.
These materials must not be disposed of as domestic waste, and must be brought to a waste
collection and recycling centre.
Do not leave the packaging materials within the reach of children!
They could pose a risk of poisoning or suffocation if ingested.
12
Werbung
Inhaltsverzeichnis
