Siemens KI51F Serie Gebrauchsanleitung Seite 45

Fitting the partition and cover
Insert the cover for the fruit and ve-
1.
getable container.
Set the humidity controller to a low
2.
humidity setting.
Insert the partition.
3.
→ Fig.
10
Telescopic rails
You can remove the telescopic rails
in order to clean them thoroughly.
Removing telescopic rails
Pull out the telescopic rail.
1.
→ Fig.
11
Move the lock in the direction of
2.
the arrow and loosen the pin
from the rear
→ Fig.
12
Push in the telescopic rail.
3.
Push the telescopic rail backwards
4.
above the rear pin
gage ⁠ .
→ Fig.
13
Installing telescopic rails
Place the extended telescopic rail
1.
on the front pin
wards slightly to lock in place
→ Fig.
14
Place the telescopic rail on the
2.
rear pin and push the locking
mechanism back
→ Fig.
15
⁠ .
and disen-
and pull it for-
⁠ .
⁠ .
Cleaning and servicing en
45