Introduction; Scope Of Delivery - Guntermann & Drunck MultiPower-2-RPM Installationsanleitung

Introduction

The central power supply
of . The maximum permissible current consumption per device is
12 Volt
Power
Out 1 Out 2
12VDC/800mA
Use a power loop cable to connect the Mini-DIN 4 sockets of the two connectable
devices to a Mini-DIN 4 socket of the central power supply.
Main Power
100-240VAC/60-50Hz/0.5-0.3A
At least one internal power supply supplies the voltage of the central power supply.
A second, internal power supply ensures uninterrupted operation if one of the two
external power supplies fails.

Scope of delivery

 1 × central power supply
 2 × power cable (PowerCable-2 Standard)
 2 × power loop cable
 1 × manual
MultiPower-2-RPM supplies up to two devices with a voltage
Status
Out In
1 Main
2 Red.
Output
Red. Power
100-240VAC/60-50Hz/0.5-0.3A
MultiPower-2-RPM
Introduction
.
800 A
G&D MultiPower-2-RPM · 3