Connection To Other Devices - Canton Smart Sounddeck 100 Kurzanleitung

CONNECTION TO OTHER DEVICES

HDMI (recommended)
®
To connect other digital devices such as a satellite receiver, BluRay-player,
game console, etc. it is recommended to connect them via one of the
3 HDMI inputs of the Sounddeck 100.
®
Connect one of the 3 HDMI
1
Sounddeck 100 with the HDMI OUT output on your digital device with a
HDMI cable.
®
Now, select the used input [BDP] for HD1, [SAT] for HD2 or [PS] for HD3
2
with the up or down arrow key ( / ) on the Smart-remote.
Note:
• Make sure that you do not connect the other playback devices to the TV,
but directly to the Sounddeck 100. This is the only way to ensure that the
best possible multichannel audio format / audiosignal is reproduced.
Optical digital input (alternative)
Connect the input OPTICAL at the Sounddeck 100 to the OPTICAL OUT
1
connector of your TV with an optical cable.
On the Smart-remote, use the up and down arrows ( / ) to select the
2
input [CD].
Notes:
• If the optical digital input is already in use, please use one of the other
unused inputs (COAXIAL and/or AUX).
• Make sure you have removed the protective caps from both ends of the
optical cable.
inputs (HD1/HD2/HD3) on the back of the
®
English
3 3 3