Changing The Interior Lighting Bulb - Teka TKI2 145 D Bedienungsanleitung

Changing the Interior
Lighting Bulb
If the lamp does not operate, follow
the following procedures:
1. Switch off the electric connection
of the refrigerator and pull out the plug.
Remove all shelves and drawers for
easy access.
2. Remove the cover carefully by
pressing it on the edge with your index
finger, as seen in figure b. Try not to
damage the plastic cover and interior
facing.
3. First, screw the bulb into its socket
tightly and check whether it is loosened.
Insert the plug again and switch on the
electricity. If the bulb operates, replace
the light cover by placing the back lock,
pushing it onto its place.
4. If the bulb does not operate,
switch off the electric connection of
the refrigerator and pull out the plug.
Replace the bulb with a new 15 watt
(maximum), screw covered E14 (SES)
bulb.
5. Immediately
damaged bulb carefully and properly.
Spare bulb can be obtained from
authorized services.
chuck out the
11
EN