Setting The Current Time - CO/Tech SPH01-04TP Original Bedienungsanleitung

Setting the current time

Day
• Hold in for 3 seconds to enter settings mode,
• Press and
Set the following in sequential order:
: Day of the week 1–7 (Monday...Sunday)
: Hours 0–23
: Minutes 0–59
Note:
In the event of a power cut, all clock settings will be deleted and need to
be made again. Temperature settings will also be deleted and revert to
the default setting of 15 °C.
Programme modes
Comfort ECO
mode mode
• Press repeatedly to advance through the programme modes.
• Press or to change value.
The current time must be set before the weekly timer programme can be used.
Comfort mode: Continuous heat (5–35 °C).
ECO mode: 4 degrees cooler than
Programme 1: Pre-programmed weekly programme.
Monday – Sunday
Hours Minutes
to change value. Confirm each step by pressing
Programme Programme
1
7
will flash.
Programme
2 3
(1–31 °C).
.
Anti-frost
mode