Technical Data; Warranty; Ec Declaration Of Conformity - GreenWorks GD40CS15 Bedienungshandbuch

EN
Problem
The machine does
not start.
The motor runs,
but the chain does
not cut correctly,
or the motor stops
after around 3 sec-
onds.
8

TECHNICAL DATA

Voltage
No load speed
Guide bar length
Chain stop
Chain oil capacity
Possible cause Solution
Pull the chain
The chain brake is brake in the direc-
engaged. tion of the user to
disengage it.
Make sure that the
The machine and
battery release
battery are not
button clicks when
connected correct-
you install the bat-
ly.
tery pack.
The battery level Charge the battery
is low. pack.
1. Push the lock-
out button and
The lock out but-
hold it.
ton and the trigger
are not pushed at
2. Push the trig-
the same time.
ger to start the
machine.
Refer to battery
The battery is too
and charger man-
hot or too cold.
ual.
Release the trigger
The machine is in
and start the ma-
the protection
chine again. Do
mode to protect
not force the ma-
the PCB.
chine to cut.
Charge the battery.
Refer to the bat-
The battery is not tery and charger
charged. manual for correct
charging proce-
dures.
Lubricate the
chain to decrease
the friction. Do
The chain is not not let the guide
lubricated. bar and the chain
operate without
sufficient lubri-
cant.
Cool the battery
Incorrect battery
pack until it de-
storage tempera-
creases to the am-
ture
bient temperature.
40 V DC
12 m/s
350 mm
< 0.15 s
180 ml
English
Weight (without battery
pack)
Measured sound pressure
level
Guaranteed sound power
level
Vibration
Chain
Guide bar
Battery model
Charger model
9

WARRANTY

(The full warranty terms and conditions can be found on
Greenworks webpage)
The Greenworks warranty is 3 years on the product, and 2
years on batteries (consumer/private usage) from the date of
purchase. This warranty covers manufacturing faults. A faulty
product under warranty might be either repaired or replaced.
A unit that has been misused or used in other ways then
described in the owner's manual might be rejected for
warranty. Normal wear, and wear parts are not considered as
warranty. The original manufacturer warranty is not affected
by any additional warranty offered by a dealer or retailer.
A faulty product must be returned to the point of purchase in
order to claim for warranty, together with the proof of
purchase (receipt).
10 EC DECLARATION OF
CONFORMITY
Name and address of the manufacturer:
Name:
Address:
Name and address of the person authorised to compile the
technical file:
Name:
Address:
Herewith we declare that the product
Category:
Model:
Serial number:
Year of Construction:
10
3.5 kg
L = 96 dB(A), K
pA
dB(A)
L = 106 dB(A)
wA.d
2
3.2 m/s , K = 1.5 m/s
CL14352
M1431452- 1041TL
G40B2/G40B25/G40B4 and
other BAF series
G40C and other CAF series
GLOBGRO AB
Globe Group Europe
Riggaregatan 53, 211 13 Malmö, Sweden
Peter Söderström
Riggaregatan 53, 211 13 Malmö, Sweden
Chainsaw
2005707 (CSF403)
See product rating label
See product rating label
= 3
pA
2