Technical Data; Warranty; Ec Declaration Of Conformity - GreenWorks GD40CS18 Bedienungshandbuch

Problem Possible cause
The machine does
not start. The chain brake is
engaged.
The machine and
battery are not
connected correct-
ly.
The battery level
is low.
The lock out but-
ton and the trigger
are not pushed at
the same time.
The battery is too
hot or too cold.
The motor runs,
The machine is in
but the chain does
the protection
not cut correctly,
mode to protect
or the motor stops
the PCB.
after around 3 sec-
onds.
The battery is not
charged.
The chain is not
lubricated.
Incorrect battery
storage tempera-
ture
8

TECHNICAL DATA

Voltage
No load speed
Guide bar length
Chain stop
Chain oil capacity
English
Solution
Pull the chain
brake in the direc-
tion of the user to
disengage it.
Make sure that the
battery release
button clicks when
you install the bat-
tery pack.
Charge the battery
pack.
1. Push the lock-
out button and
hold it.
2. Push the trig-
ger to start the
machine.
Refer to battery
and charger man-
ual.
Release the trigger
and start the ma-
chine again. Do
not force the ma-
chine to cut.
Charge the battery.
Refer to the bat-
tery and charger
manual for correct
charging proce-
dures.
Lubricate the
chain to decrease
the friction. Do
not let the guide
bar and the chain
operate without
sufficient lubri-
cant.
Cool the battery
pack until it de-
creases to the am-
bient temperature.
40 V DC
20 m/s
400 mm
< 0.12 s
180 ml
Weight (without battery
pack)
Measured sound pressure
level
Guaranteed sound power
level
Vibration
Chain
Guide bar
Battery model
Charger model
9

WARRANTY

(The full warranty terms and conditions can be found on
Greenworks webpage)
The Greenworks warranty is 3 years on the product, and 2
years on batteries (consumer/private usage) from the date of
purchase. This warranty covers manufacturing faults. A faulty
product under warranty might be either repaired or replaced.
A unit that has been misused or used in other ways then
described in the owner's manual might be rejected for
warranty. Normal wear, and wear parts are not considered as
warranty. The original manufacturer warranty is not affected
by any additional warranty offered by a dealer or retailer.
A faulty product must be returned to the point of purchase in
order to claim for warranty, together with the proof of
purchase (receipt).
10 EC DECLARATION OF
CONFORMITY
Name and address of the manufacturer:
Name: GLOBGRO AB
Globe Group Europe
Address: Riggaregatan 53, 211 13 Malmö, Sweden
Name and address of the person authorised to compile the
technical file:
Name: Peter Söderström
Address: Riggaregatan 53, 211 13 Malmö, Sweden
Herewith we declare that the product
Category: Chainsaw
Model: 2005807(CSF404)
Serial number: See product rating label
9
3.8 kg
L = 92 dB(A), K = 3
pA pA
dB(A)
L = 104 dB(A)
wA.d
2 2
4.9 m/s , K = 1.5 m/s
90PX056X/CL14356
164MLEA041/
M1431656-1041TL
BAF724 and other BAF series
2910907 and other CAF ser-
ies
EN