Dust/Chip Extraction; Starting Operation - Bosch GWI 10,8 V-LI Professional Originalbetriebsanleitung

OBJ_BUCH-134-006.book Page 18 Wednesday, June 11, 2008 2:39 PM
18 | English
Note: The battery is supplied partially charged.
To ensure full capacity of the battery, completely
charge the battery in the battery charger before
using your power tool for the first time.
The lithium ion battery can be charged at any
time without reducing its service life. Interrupt-
ing the charging procedure does not damage the
battery.
The Li-ion battery is protected against deep dis-
charging by the "Electronic Cell Protection
(ECP)". When the battery is empty, the machine
is switched off by means of a protective circuit:
The inserted tool no longer rotates.
Do not continue to press the
WARNING
On/Off switch after the ma-
chine has been automatically switched off. The
battery can be damaged.
To remove the battery 10 press the unlocking
buttons 9 and pull out the battery downwards.
Do not exert any force.
The battery is equipped with a NTC temperature
control which allows charging only within a tem-
perature range of between 0 °C and 45 °C. A long
battery service life is achieved in this manner.
Observe the notes for disposal.
Changing the Tool (see figure B)
Before any work on the power tool, remove
the battery.
Use only insert tools with ball catch (compliant
with DIN 3126-E6.3), see picture page. Other
screwdriver bits can only be used with a univer-
sal holder with ball catch.
Inserting
Pull the locking sleeve 1 forward, push the insert
tool to the stop into the tool holder 2 and release
the locking sleeve 1 to lock the insert tool.
Removing
Pull the locking sleeve 1 forward and remove the
insert tool.
1 609 929 R97 | (11.6.08)

Dust/Chip Extraction

Dusts from materials such as lead-containing
coatings, some wood types, minerals and
metal can be harmful to one's health. Touch-
ing or breathing-in the dusts can cause aller-
gic reactions and/or lead to respiratory infec-
tions of the user or bystanders.
Certain dusts, such as oak or beech dust, are
considered as carcinogenic, especially in con-
nection with wood-treatment additives (chro-
mate, wood preservative). Materials contain-
ing asbestos may only be worked by
specialists.
– Provide for good ventilation of the working
place.
– It is recommended to wear a P2 filter-class
respirator.
Observe the relevant regulations in your coun-
try for the materials to be worked.
Operation

Starting Operation

Inserting the Battery
Use only original Bosch lithium ion batteries
with the voltage listed on the nameplate of
your power tool. Using other batteries can
lead to injuries and pose a fire hazard.
Note: Use of batteries not suitable for the ma-
chine can lead to malfunctions of or cause dam-
age to the power tool.
Reversing the Rotational Direction
(see figure C)
The rotational direction switch 4 is used to re-
verse the rotational direction of the machine.
However, this is not possible with the On/Off
switch 5 actuated.
Right Rotation: For drilling and driving in screws,
push the rotational direction switch 4 left to the
stop.
Left Rotation: For loosening or unscrewing
screws, push the rotational direction switch 4
right to the stop.
Bosch Power Tools