Functional Description; Intended Use; Product Features; Technical Data - Bosch GBM 13 HRE Professional Originalbetriebsanleitung

Never use the machine with a damaged ca-
ble. Do not touch the damaged cable and
pull the mains plug when the cable is dam-
aged while working. Damaged cables in-
crease the risk of an electric shock.
Products sold in GB only: Your product is fitted
with an BS 1363/A approved electric plug with
internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets,
it should be cut off and an appropriate plug fit-
ted in its place by an authorised customer serv-
ice agent. The replacement plug should have the
same fuse rating as the original plug.
The severed plug must be disposed of to avoid a
possible shock hazard and should never be in-
serted into a mains socket elsewhere.
Products sold in AUS and NZ only: Use a resid-
ual current device (RCD) with a rated residual
current of 30 mA or less.

Functional Description

Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.

Intended Use

The machine is intended for drilling in wood,
metal, ceramic and plastic. Machines with elec-
tronic control and right and left rotation are also
suitable for screwdriving and tapping.

Product Features

The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Key type drill chuck
2 Rotational direction switch
3 On/Off switch
4 Lock-on button for On/Off switch
Bosch Power Tools
5 Auxiliary handle (insulated gripping surface)
6 Chuck key
7 Handle (insulated gripping surface)
8 Screwdriver bit*
9 Universal bit holder*
10 Securing screw for key type drill chuck
11 Allen key*
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.

Technical Data

Rotary drill
Article number
Rated power input
Output power
No-load speed
Rotational speed under
load, max.
Rated torque
Spindle collar dia.
Max. drilling dia.
– Steel
– Wood
– Aluminium
Chuck clamping range
Weight according
to EPTA-Procedure
01/2003
Protection class
The values given are valid for nominal voltages [U] of
230/240 V. For lower voltage and models for specific
countries, these values can vary.
Please observe the article number on the type plate of
your machine. The trade names of the individual ma-
chines may vary.
English | 15
GBM 13 HRE
Professional
0 601 049 6..
W 550
W 285
-1
min 0 – 550
-1
min 450
Nm 5
mm 43
mm 13
mm 40
mm 20
mm 1.5 – 13
kg 2.1
/II
1 609 929 T20 | (4.11.09)