Sebson HF WAL A Bedienungsanleitung Seite 11

Time setting (switching off delay):
Reach Setting:
Function test:
To set the detection range and the daylight test, turn the knobs to the positions shown. The motion detector is
activated after a warm-up phase of approx. 30s. If no further movement takes place in the sensing area of the
sensor, the sensor switches off.
The duration of the operating time can be set continuously from approx. 10s to
12min. The timer is restarted if a movement from the sensor is detected before the
set time has elapsed.
With this setting controller, the detection range of approx. 5m to 15m can be set.
Turning the adjuster to the left will extend the range.
11