Hints And Tips - AEG IAE64843FB Benutzerinformation

14 www.aeg.com
To leave the Menu touch
side of the display, outside of the pop-up
window. To navigate through the Menu
use or .
6.16
Assisted Cooking
This function adjusts the temperature to
different types of food and maintains it
throughout cooking. It can only be
activated for the left front cooking zone.
1. Touch
Menu.
2. Select Assisted Cooking and choose
the type of food you would like to
prepare from the list.
For each type of food there are a few
options available. Follow the
instructions shown on the display.
• You can touch OK on top of the
pop-up window to use the default
settings.
• You can set the timer function.
When the pot reaches the
intended temperature you can
activate the timer.
• You can change the default heat
level.
3. Once the pot reaches the intended
temperature an acoustic signal
sounds and a pop-up window
appears. To close the window and
start the function touch OK. To
deactivate the window permanently
check
function.

7. HINTS AND TIPS

WARNING!
Refer to Safety chapters.
7.1 Cookware
For induction cooking zones
a strong electro-magnetic
field creates the heat in the
cookware very quickly.
Use the induction cooking
zones with suitable
cookware.
or the right
on the display to open the
before you activate the
To stop the function touch
or touch and select Assisted
Cooking, choose any type of food and
touch Stop.
To leave the Menu touch
side of the display, outside of the pop-up
window. To navigate through the Menu
use or .
6.17
Melting
You can use this function to melt
different products, e.g. chocolate or
butter. You can use the function only for
one cooking zone during one cooking
session.
1. Touch on the display to open the
Menu.
2. Select Hob Functions > Melting from
the list.
3. Touch Start
You need to select the desired zone.
A pop-up window appears asking if
you want to cancel the previous heat
setting if there was any.
To leave the Menu touch
side of the display, outside of the pop-up
window. To navigate through the Menu
use or .
To stop the function touch the zone
selection symbol and then touch Stop.
Cookware material
• correct: cast iron, steel, enamelled
steel, stainless steel, multi-layer
bottom (with a correct marking from a
manufacturer).
• not correct: aluminium, copper,
brass, glass, ceramic, porcelain.
Cookware is suitable for an induction
hob if:
• water boils very quickly on a zone set
to the highest heat setting.
• a magnet pulls on to the bottom of
the cookware.
and Stop
or the right
or the right