Safety Instructions; General Information - Becker Centronic SensorControl SC811 Montage- Und Betriebsanleitung

General information

• Please keep the instruction manual safe!
• Only use unmodified original parts from the control unit manufacturer.
• Keep children away from control units.
• Observe all pertinent country-specific regulations.
Caution
•
Risk of injury due to electric shock.
• Connections to the 230 V mains must always be per-
formed by an authorised specialist.
• Disconnect the connecting cable from the power prior to
installation.
•
Keep people out of the system's range of travel.
•
If the system is controlled by one or more transmitters,
the system's range of travel must always be visible during
operation.
•
When connecting the control cables (protected extra-low
voltages), only use cables with sufficient electrical
strength.
• Observe the specifications for the sun protection system.
14 - en

Safety instructions