Product Description And Specifications; Technical Data; Noise/Vibration Information; Dust/Chip Extraction - Bosch PSM 160 A Originalbetriebsanleitung

OBJ_BUCH-363-002.book Page 12 Thursday, April 21, 2011 9:49 AM
12 | English
Product Description and Specifica-
tions
Intended Use
The machine is intended for dry sanding and polishing of
wood, filler and coated surfaces. It is especially suitable for
profiles, corners or hard to reach locations.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 On/Off switch
2 Dust box, complete (Microfilter System)
3 Latching lever for dust box
4 Sanding sheet*
5 Sanding plate
6 SDS button for release of the sanding plate
7 Extraction outlet
8 Filter element (Microfilter System)
9 Extraction adapter*
10 Vacuum hose*
11 Pad extender*
12 Sanding plate for extender*
13 Narrow pad extender*
14 Narrow rounded pad extender*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.

Technical Data

Multi Sander
Article number
Rated power input
No-load speed
No-load orbital stroke rate
Sanding sheet surface
Orbit diameter
Weight according to
EPTA-Procedure 01/2003
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
Please observe the article number on the type plate of your machine.
The trade names of the individual machines may vary.
2 609 002 309 | (21.4.11)
Downloaded from www.Manualslib.com
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
3 603 C77 0..
W
-1
min
-1
min
2
cm
mm
kg
manuals search engine

Noise/Vibration Information

Measured sound values determined according to EN 60745.
Typically the A-weighted sound pressure level of the product
is 76 dB(A). Uncertainty K=3 dB.
The noise level when working can exceed 80 dB(A).
Wear hearing protection!
Vibration total values a
determined according to EN 60745:
2
a =5.5 m/s , K=1.5 m/s
h
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given
in EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly in-
crease the exposure level over the total working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working pe-
riod.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with the fol-
lowing standards or standardization documents: EN 60745
according to the provisions of the directives 2004/108/EC,
2006/42/EC.
Technical file at:
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen
Dr. Egbert Schneider
PSM 160 A
Senior Vice President
Engineering
160
12000
24000
104
Robert Bosch GmbH, Power Tools Division
1.6
D-70745 Leinfelden-Echterdingen
Leinfelden, 06.04.2011
1.4
Assembly
/II
Before any work on the machine itself, pull the mains
plug.

Dust/Chip Extraction

Dusts from materials such as lead-containing coatings,
some wood types, minerals and metal can be harmful to
one's health. Touching or breathing-in the dusts can cause
allergic reactions and/or lead to respiratory infections of
the user or bystanders.
(triax vector sum) and uncertainty K
h
2
.
Dr. Eckerhard Strötgen
Head of Product
Certification
Bosch Power Tools