Control Panel; Fastfreeze Function - Electrolux ENT6TE18SX Bedienungsanleitung

4. CONTROL PANEL

2 1
1. Fridge temperature indicator LED
2. Freezer temperature indicator LED
3. FastFreeze indicator
4. Fridge compartment indicator
5. Freezer compartment indicator
6. ON/OFF button
Compartment selection button
7. FastFreeze button
Temperature regulator
4.1 Switching on
1. Insert the plug into the wall socket.
2. Touch the ON/OFF button (6) if all
LED indicators are off.
4.2 Switching off
Keep touching the ON/OFF button (6) for
3 seconds.
All indicators light off.
4.3 Temperature regulation
Before regulating the temperature, it is
necessary to select the compartment
(fridge or freezer).
The upper or lower cavity is selected by
the compartment selection button (6).
To select the freezer compartment touch
the compartment selection button (6)
until LED corresponding to the lower
cavity lights up.
The temperature LED indicator shows
the latest set temperature.
Recommended setting is -18°C.
To select the fridge compartment touch
the compartment selection button (6)
2 1 2 3 2 4 5 2
7 4 6 3
until LED corresponding to the upper
cavity lights up.
The temperature LED indicator shows
the latest set temperature.
Recommended setting is +4°C.
To set temperature:
1. Touch temperature regulator button
(7).
Current temperature indicator blinks.
2. Any time you touch the temperature
regulator button (7), the setting
moves by one position. When you
select a temperature, the LED
corresponding to selected
temperature value blinks for a while
and the setting is fixed.
The set temperature will be
reached within 24 hours.
After a power failure the set
temperature remains stored.

4.4 FastFreeze function

The FastFreeze function is used to
perform pre-freezing and fast freezing in
sequence in the freezer compartment.
This function accelerates the freezing of
fresh food and, at the same time,
protects food products already stored in
the freezer compartment from
undesirable warming.
To freeze fresh food activate
the FastFreeze function at
least 24 hours before placing
the food to complete pre-
freezing.
To activate FastFreeze function press
the FastFreeze button (7) for 3 seconds.
The FastFreeze indicator switches on.
This function stops
automatically after 52 hours.
It is possible to deactivate the function at
any time by pressing FastFreeze button
(7) for 3 seconds again. The FastFreeze
indicator switches off.
ENGLISH 9