t
Attention Risk of damage!
During use, the screws can
loosen slowly and impair the
BBQ's stability.
– Check the stability of the screws prior
to each use. If necessary, tighten all of
the screws again to ensure the BBQ is
standing securely.
Attention Risk of damage!
Do not use any strong or
grinding solvents or abrasive
pads, since these can attack
the surfaces and leave behind
scrape marks.
Assembly
Preparation
Danger Risk of injury!
Failure
instructions
problems and risks while using
the BBQ.
– Follow all of the assembly instructions
listed here.
1. First read through the assembly
instructions completely.
2. Take sufficient time to carry out the
assembly and use an even working
surface of three to four square metres.
3. Small parts such as handles will
probably be preassembled.
20
P150171_TEPRO_Berkeley_1145_K_20150907_EN.indd 20
to
follow
these
can
lead
to
required tools
1 x Phillips screwdriver
1 x Adjustable spanner
Assembling the BBQ
1. Unpack the BBQ and dispose of all
packaging materials. Keep the
packaging materials out of the reach
of children and dispose of them
according to regulations after BBQ
assembly.
2. 8 M6 x 12 Screws
8 Washers
8 M6 Nuts
3. 8 M6 x 12 Screws
8 Washers
8 M6 Nuts
7/9/15 12:17 PM