Herunterladen Inhalt Inhalt Diese Seite drucken

Technische Daten / Technical Data; Ersatzteile / Spare Parts - Carson Reflex Wheel LCD Betriebsanleitung

7 kanal
Vorschau ausblenden Andere Handbücher für Reflex Wheel LCD:
Inhaltsverzeichnis

Werbung

X
LED (TASCHENLAMPE) / LED (FLASHLIGHT)
• Der Taschenlampenmodus dient in erster Linie zur Verwendung
als Zubehör beim Anbringen von Modellen in der Nacht oder bei
schlechten Lichtverhältnissen. / The flashlight mode is used mainly
as an accessory when using models at night or under poor lighting
conditions.
Y
MODUS FÜR GASHEBEL-SIGNALLEUCHTE / MODE FOR THROTTLE INDICATOR
• Die Signalleuchte umfasst drei superhelle blaue LED-Leuchten. /
The indicator comprises three ultra-bright blue LED lights.
• Das Display leuchtet während des Startvorgangs auf, die LED-
Signalleuchte blinkt und schaltet sich dann aus. Die Gashebel-
Signalanzeige ist aus, wenn der Gashebel nicht in Betrieb ist. Wenn
der Benutzer den Gashebel betätigt, leuchten die Signalleuchten

Technische Daten / Technical data

• 2 Kanal Fernsteuerung: 2,4 GHz / 2-channel transmitter: 2.4 GHz
• Betriebsspannung Sender: 4,8-6V / Transmitter operating voltage: 4.8-6V
• Maximale Sendeleistung: 100 mW (Modulation FHSS) / Max. transmitter
power: 100 mW (20db) Modulation FHSS

Ersatzteile / Spare Parts

500501546
Ersatzempfänger / Receiver
Reflex Wheel 7-Kanal
• Für die LED-Taste gibt es die Einstellungen OFF (Aus) und ON
(AN). Wird die Taste einmal gedrückt, wird die Taschenlampe
eingeschaltet. Wird die Taste zweimal gedrückt, wird die
Taschenlampe ausgeschaltet. / The LED button has the settings OFF
and ON. If the button is pressed once, the flashlight is switched on. If the
button is pressed twice, the flashlight is switched off.
in entsprechender Anzahl auf, je nachdem, wie stark der Benutzer
den Gashebel betätigt. / During start-up the display lights up with
the LED indicator flashing and then switching off. The throttle indicator
is off when the throttle is not in use. When the user pulls the throttle
trigger, the number of indicators that light up corresponds to how
strongly it is pulled.
• Betriebsspannung Empfänger / Receiver operating voltage:
- Empfänger: 6 - 11V / Receiver: 6 - 11V
13

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis