Using Your Refrigerator Thermostat Setting Button - Beko BSSA200M3S Bedienungsanleitung

5 Using your refrigerator
Thermostat setting button
The operating temperature is regulated
by the temperature control.
Warm
1 2 3
(Or) Min.
1 = Lowest cooling setting
(Warmest setting)
5 = Highest cooling setting
(Coldest setting)
(Or)
Min. = Lowest cooling setting
(Warmest setting)
Max. = Highest cooling setting
(Coldest setting)
The average temperature inside the
fridge should be around +5°C.
Please choose the setting
according to the desired temperature.
Please note that there will be
different temperatures in the cooling
area.
The coldest region is
immediately above the vegetable
compartment.
The interior temperature also
depends on ambient temperature, the
frequency with which the door is
opened and the amount of foods kept
inside.
Frequently opening the door
causes the interior temperature to rise.
For this reason, it is recommended to
close the door again as soon as
possible after use.
All manuals and user guides at all-guides.com
refrigerator changes for the following
reasons:
• Seasonal temperatures.
• Frequent opening of the door and
• Food put into the refrigerator
• The location of the refrigerator in
• You may adjust the varying interior
Cold
4 5
Max.
• If the ambient temperature is
• If the ambient temperature is lower
12 EN
The interior temperature of your
leaving the door open for long
periods.
without cooling down to the room
temperature.
the room (e.g. exposing to
sunlight).
temperature due to such reasons
by using the thermostat. Numbers
around the thermostat button
indicates the cooling degrees.
higher than 32°C, turn the
thermostat button to maximum
position.
than 25°C, turn the thermostat
button to minimum position.