Werbung
Verfügbare Sprachen
Verfügbare Sprachen
FPX PREMIUM AMPLIFIER
U s e r m a n u a l
3.5 - Connecting the speakers and the remote to your FPX amplifier
Solder and insulate (using heat shrink sleeving) the REMOTE cable to the cable connector provided (Fig.
4).
Connect the other end of the REMOTE cable to the REMOTE terminal on the head unit.
fig. 4
Finally, connect the speaker cables to the amplifier, taking care to match polarities (+ to +, - to -). (Fig. 5).
fig. 5
WARNING
All speakers or speaker sets cabled to your FPX 4.800, FPX 4.400 SQ, FPX 2.750, FPX 5.1200 amplifier
must always have an impedance greater than 2 Ohms.
WARNING
All speakers or speaker sets cabled to your FPX 1.1000 amplifier must always have an impedance greater
than 1 Ohm.
8
Werbung
