Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
All manuals and user guides at all-guides.com
Operating the device
Place suitable cookware onto the cooker plate, and connect the plug to suitable socket.
The operation of both zones is the same.
Caution! Make no hot pots or pans on the keypad!
Stand-By-Modus
Press the On / Off button.
You will hear a beep and see flashing lines --
--
--
--
on the display next to every
cook zone.
If you have not selected a program within about 2 minutes, the unit will return to standby.
Power
Press the button
for the required cooking
zone.
With the buttons „1-9" you can change the power levels or by pressing the "0", switch off the relevant
cooking zone. The operation of four zones is the same. The only difference is that the left down
heating zone and right up heating zone have two heating circles, you can choose the inner heating
circle for a smaller pot or for lower power or the whole bigger heating circle by pressing the heating
zone selection button
.
up to max. 1800 W,
up to max. 2200 W,
up to max. 2000 W,
up to max. 1200 W
Residual heat indicator:
When the hob has been operating for some time, there will be some residual heat.
The residual heat indicator warns for each cooking zone separately with "H" symbol.
Timer
After you have selected the power press the timer key
.
Timer confirmation:
With repeated pressing onto timer key choose the zones you want to set as the LED light showing.
The display shows "00". With the keys "0-9" set the time in 1-minute steps (max. 99 min.) After 5
seconds no number level key be pressed, the time will start timing and the display will indicate the
countdown time until to "00". If the two zones has been set different time, the display will indicate the
less time setting zone.
Timer cancellation
By pressing onto timer key choose the zone you want to cancel the timer. Then press number level
key"0" two times and the timer function will be cancelled.
Werbung
Inhaltsverzeichnis
