Operating The Device; Standby-Modus; Residual Heat Indicator - K&H NC-8608SL Gebrauchsanweisung

Operating the device

Place suitable cookware onto the cooker plate, and connect the plug to suitable socket.
The operation of both zones is the same.
Caution! Make no hot pots or pans on the keypad!
Stand-By-Modus
Press the On / Off button.
You will hear a beep and see flashing lines --
every cook zone. If you have not selected a program within about 2 minutes, the unit will return to
standby.
Power
Press the button
You can change the power levels by sliding the slider or by pressing the "0" to switch off the relevant
cooking zone.The operation of five zones is the same. The only difference is that the left down heating
zone have three heating circles and the middle heating zone have two circel zones, you can choose
the inner heating circle for a smaller pot or for lower power or the whole bigger heating circle by
pressing the heating zone selection button
up to max. 2400 W,
up to max. 1200 W,

Residual heat indicator:

When the hob has been operating for some time, there will be some residual heat.
The residual heat indicator warns for each cooking zone separately with "H" symbol.
--
for the required cooking zone.
or
up to max. 1200 W,
up to max. 1800 W
-- -- -- on the display next to
.
up to max. 2000 W,