Operating The Device; Standby-Modus; Residual Heat Indicator - K&H C10208 Gebrauchsanweisung

Operating the device

Place suitable cookware onto the cooker plate, and connect the plug to suitable socket.
The operation of both zones is the same.
Caution! Make no hot pots or pans on the keypad!
Stand-By-Modus
Press the On / Off button.
You will hear a beep and see flashing lines --
every cook zone. If you have not selected a program within about 2 minutes, the unit will return to
standby.
Power
Press the button
With the buttons „1-9" you can change the power levels or by pressing the "0", switch off the relevant
cooking zone. The operation of four zones is the same. The only difference is that the left down
heating zone have two heating circles, you can choose the inner heating circle for a smaller pot or for
lower power or the whole bigger heating circle by pressing the heating zone selection button
up to max. 2400 W,
up to max. 1800 W

Residual heat indicator:

When the hob has been operating for some time, there will be some residual heat.
The residual heat indicator warns for each cooking zone separately with "H" symbol.
--
for the required cooking
up to max. 1200 W,
-- -- -- on the display next to
zone.
up to max. 3600 W,
.
up to max. 1200 W,