IKEA LAGAN BF275 Bedienungsanleitung Seite 8

ENGLISH
With cleaning in a dishwasher the grease
fi lter may become dull; this does not effect
its fi ltering capacity.
Grease fi lter maintenance:
1. Disconnect the hood from the power
supply.
2. Open the extraction grille or remove the
self-supporting grease fi lter (in the latter
case, wash the fi lter immediately).
3. Remove the device securing the grease
fi lter.
4. Remove the dirty grease fi lter.
5. After changing or washing the grease
fi lter (depending on the model), refi t
by proceeding in reverse order, making
sure it covers the entire extraction
surface.
Charcoal fi lter maintenance
(Recirculation hoods only).
Charcoal fi lter is neither lavable nor
regenerable.
Replace it every 4 months.
1. Disconnect the hood from the power
supply.
2. Open the extractor grille or remove the
self-supporting grease fi lter.
3. Fit the fi lter over the extraction motor
protection grille so that the slots on the
fi lter match the hooking pins located at
the sides of the motor protection grille.
4. Turn the charcoal fi lter clockwise to lock
it (bayonet fi xing).
5. Make sure the internal selector
"Extractor /Filter " is set to "Filter ".
6. Refi t the extractor grille or grease fi lter.
To remove the charcoal fi lter proceed in
reverse order.
Lamp maintenance
1. Disconnect the hood from the power
supply.
2. Open the extractor grille or remove the
self-supporting grease fi lter.
3. Remove the burnt-out lamp. Use
40W max. incandescent or 28W max.
halogen E14 lamps only.
4. Refi t the extractor grille or grease fi lter.
IMPORTANT: make sure you don't touch the
lamp with your hands.
8