Locking And Unlocking The Coil Resistance In Vt Mode - INNOCIGS EVIC BASIC SET Bedienungsanleitung

INNOCIGS EVIC BASIC SET – OPERATING & CHANGING THE MODES

1. Locking and unlocking the coil resistance in VT mode

Press the fire button three times to enter the menu. Press the "down" button twice so the second line
displaying the resistance flashes on the display. Press the „up" button to lock or unlock the resistance of
the atomizer. When the „lock" symbol is shown on the display, the resistance is locked.
Note
a. Only lock the resistance when the coil is at room temperature. This will ensure that the correct „base
resistance" of the atomizer coil is locked. The temperature control will remain correct, as long as the coil
is not replaced. If the resistance is locked, you can remove the clearomizer cap regardless of whether the
atomizer coil is hot or cold.
b. Before changing to another atomizer coil, unlock the resistance. Otherwise, the VT system will not work
properly. In „Resistance Unlock" mode, please make sure that the coil is changed at room temperature to
ensure temperature accuracy.
53