INNOCIGS EVIC BASIC SET Bedienungsanleitung Seite 52

INNOCIGS EVIC BASIC SET – OPERATING & CHANGING THE MODES
Adjusting the TCR mode
While the eVic Basic is turned off, press and hold the fire button and „up" button at the same time for about
5 seconds to enter in the TCR-menu:
1. Press "up" or "down" buttons to switch between TCR M1, M2 and M3.
2. Confirm the desired mode by pressing the fire button.
3. Press the "up" or "down" button to increase or decrease the settings.
4. Confirm your setting with the fire button or wait 10 seconds.
50