D-Link DSL-G684T Schnellinstallationsanleitung Seite 9

Configuring the Router (continued)
Static IP Address Connections
If you selected the Static IP Address connection type, change the WAN IP Address, Subnet
Mask, ISP Gateway Address and (if available) Secondary DNS Server IP address as
instructed by your ISP. Select the Connection Type used for encapsulation. If you have been
instructed to change the VPI number and VCI number, type in the new values. Click Next when
you are ready to continue the Setup Completed menu.
Change the VPI and
numbers as instructed by
your ISP by Typing
new values.
Type the IP addresses for
the WAN IP Address,
WAN Subnet Mask,
Gateway Address
Primary/Secondary DNS
Server.
Select the Connection
Type as instructed by your
ISP.
Click the Next button.
Skip ahead to the Setup
Completed menu.
For some IPoA Static IP Address Connection Types, it may be necessary to enter an
IP address for an ARP server. Use the
VCI
in the
ISP
and
connections if necessary.
ARP Server Address
9
entry field for IPoA