D-Link DSL-G684T Schnellinstallationsanleitung Seite 7

Configuring the Router (continued)
PPPoE/PPPoA Connections
If you selected the PPPoE/PPPoA connection type in the previous menu, you will see the Setup
Wizard menu pictured here. Type in the Username and Password used to identify and verify
your account to the ISP. If you have been instructed to change the VPI number and VCI number,
type in the new values. Select the Connection Type used for encapsulation specific to your
service. Click Next when you are ready to continue the Setup Completed menu.
Type the Username
and Password for your
ISP account.
Change the VPI and
numbers as instructed by
your ISP by Typing
new values.
Select the Connection
Type used for your ADSL
service.
Click the Next button.
Skip ahead to the Set
Wireless LAN menu.
The Set Wireless LAN Connection window is for the
wireless side of your router. Enter the WLAN name for
your network in the
channel to be used for your WLAN from the
down menu.
Click the Next button.
Skip ahead to the Setup
Completed menu.
VCI
in the
SSID field and choose the wireless
Channel pull
7