Care And Cleaning; Troubleshooting - Electrolux EQLP4520IK Bedienungsanleitung

34 www.electrolux.com
He Use to:
at
set
tin
g
14 Boil water, cook pasta, sear meat (goulash, pot roast), deep-
fry chips
Boil large quantities of water. Power function is activated.

6. CARE AND CLEANING

Clean the appliance after each use.
Always use cookware with clean bottom.
Scratches or dark stains on the
glass-ceramic cause no effect on
how the appliance operates.
To remove the dirt:
• – Remove immediately: melted plas-
tic, plastic foil, and food with sugar. If
not, the dirt can cause damage to
the appliance.

7. TROUBLESHOOTING

Problem
You cannot activate the
appliance or operate it.
An acoustic signal
sounds and the appliance
deactivates.
An acoustic signal
sounds when the appli-
ance is deactivated.
All manuals and user guides at all-guides.com
Time
Possible
You touched 2 or more
sensor fields at the same
time.
The STOP+GO function
operates.
There is water or fat
stains on the control pan-
el.
You put something on
one or more sensor fields.
Hints
– Remove after the appliance is
sufficiently cool: limescale rings ,
water rings, fat stains, shiny metallic
discolorations. Use a special cleaning
agent for glass ceramic.
• The surface of the hob has horizontal
grooves. Clean the appliance with a
moist cloth and some detergent with a
smooth movement from left to right.
• At the end rub the appliance dry with
a clean cloth.
Remedy
Activate the appliance
again and set the heat
setting in less than 10
seconds.
Touch only one sensor
field.
Refer to the chapter "Dai-
ly use".
Clean the control panel.
Remove the object from
the sensor fields.
Nominal
power
consump-
tion
100 %