Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
INSTALLATION
Fully read and understand the directions before installation.
Refer to addi tional safety information at the end of this
document.
1
Isolate the electrical circuit.
2
Use a 2-pole voltage detector to ensure that there is no
power at the hardwire connection.
WARNING: Do not continue with the installation or repair until the electrical circuit
is proven electrically dead.
3
Use the 2 screws to secure the wall bracket to the wall:
Wood installation: Use a stud sensor to determine an
appropriate mounting location, then use the 2 screws to
secure the wall bracket.
GB
5
Werbung
Inhaltsverzeichnis
