fillikid CC8015 Bedienungsanleitung Seite 3

CC8015 bathtub seat
EN
IMPORTANT!
READ CAREFULLY AND KEEP FOR FUTURE REFERENCE. OBSERVE AND
FOLLOW THE OPERATING INSTRUCTIONS
TO AVOID INJURY
Never leave your child unattended and always hold them securely when bathing!
Make sure the baby bath is always on a stable surface. When the baby bath is stable,
place the bath seat and fill the bath.
the bath seat and fill the bath with water. Make sure that the bath water is not too
hot. The ideal temperature of the bath water is between 36 and 38 degrees. In the
first few weeks, it is important that the baby's shoulders are under the water so that
he or she does not cool down. Do not bathe your baby for too long (max. 10
minutes). Make sure your baby stays warm and avoid large temperature di eren-
ces.
WARNING - DROWNING HAZARD
Children have drowned while bathing.
Children can drown quickly in water as shallow as 2 cm.
Always stay with your child while bathing.
Never leave the child unattended in the bath, even for a short moment. If you have
to leave the room, take your child with you.
Do not use this product on an elevated surface.
To avoid the risk of scalding from hot water from the tap, position the product so
that the child cannot reach the water source.
Always check the water temperature before bathing the child.
Always check the stability of the product before use.
Do not use the product if any components are defective or missing.
Do not use any spare parts or accessories other than those approved by the
manufacturer.
The bath seat can be used for children weighing up to 9 kg.
We recommend using the bath seat only in combination with a fillikid baby bath.
The bath seat can be used until the child can sit without support.
Cleaning:
If necessary, clean with warm water or soapy water. Do not use aggressive or
abrasive cleaning agents and abrasive cloths/sponges. They could damage the
product.
folded up unfolded