Function Of The Product - HMS LOOP SVP13 3D Bedienungsanleitung

WARNING
!
Unauthorized dismantle, disassembly or renovation is not allowed to prevent electrical shock or any
malfunctions. Please contact manufacture or local dealer immediately if there is any service work
needed.
Stop using the Product under the Product under below conditions, then power off and remove the
plug from power supply.
Water or other liquid is accidentally splashed onto the Product or controller.
Any accesories found damaged or internal component is exposed.
Feel abnormal or severe pain during use.
Power failure.
Thundering or lighting weather.
Plug and power cord
Check if the voltage complies with the one specified for the Product. Do not retract the power plug with wet
hand to prevent electric shock. Hold the plug rather than the power cord to pull out the power cord. Turn off
the power switch and remove the plug from the power supply in case of electrical failure of not in use for a
long time. Stop using the Product if the power card has any damage, turn off the over switch, pull out the
plug, and contact technicians for repair.

Function of the Product

9