Function Of Controller - HMS LOOP SVP13 3D Bedienungsanleitung

Function od controller
1. Start: See 1
2. Program: See 2
3. Speed+/-: While machine works in manual mode, speed can be adjusted by this
button.
4. Time+/-: When machine stop in manual mode, time can be adjusted between 1-20
minutes(Default time: 10 minutes).
5. Led displaying method:
Method 1: Mode. Speed
Method 2: Minutes: Second
Both method will alternate in 5 seconds.
START/ STOP: Insert the power plug, switch on power, then press
the buton to start the product. In the operation of the machine,
press this buton to stop working.
TIME-: Time decrease: the default working time is 10 minutes,
divided into 10 levels, press this button to decrease time.
Speed+: Speed increase: Manual 1-20. Press this button to incre-
ase the speed when the machine is operating.
TIME+: Time increase: the default working time is 10 minutes,
divided into 10 levels, press this button to increase time.
SPEED-: Speed decrease: Manual 1-20. Press this button to de-
crease the speed when the machine is operating.
Note: The effective reception range of the remote control
!
signal is 2,5 meters, the infrared emission indicator of the
controller should be aligned the infrared receiving window
on the product.
EN
11