Video Mode; Photo Mode - Rollei 10s Plus Anleitung

Camera Description
Lens
1
Power/Mode Button
2
Shutter/Select Button
3
Mode Button
4
Battery compartment & Micro SD Slot
5
1/4" Tripod Connection
6
Micro HDMI Slot
7
Micro USB Slot
8
Built-In Microphone
9
Built-In Speaker
10
Charging Indicator
11
Operation Indicator
12
Touch Display Screen
13
Waterproof Case
Insert Camera into Waterproof Case
1. Ensure the case is clean.
2. Insert the camera and make sure the lens fits neatly in the lens cavity.
3. Close the locking clamps.
4. The camera can be mounted using the accessories provided.
Battery
Before using the device for the first time, you must fully charge the battery.
Charging the Battery
1. Connect the camera to a computer or USB power supply (DC 5V
2. The charging status light turns on while the battery is charging.
3. The charging status light turns off when the battery is fully charged.
Changing the Battery
1. Hold the camera so that you can see the camera display and slide the battery
cover to the right to open the battery compartment.
2. Remove the battery.
3. lnsert the new battery so the contacts line up with those of the camera.
Getting Started
– Turn On: Press and hold the Power/Mode Button for 3 seconds. When the
camera is turned on, the Operation Indicator turns on.
– Turn Off: Press and hold the Power/Mode Button for 3 seconds.
Button Function
Overview Menu
Turn the camera on and press the Mode
Button to access the following camera
menu and to select the different modes.
To access a mode, briefly press the
Shutter/Select Button:
1. Mode Menu: Video or Photo
2. Playback video and photo
3. System Settings
4. Return to previous screen
3 4
2
1
5 6
9
10
11
12
2A).
1 2
3 4
Button Function
To exit the menu, press the Power/
Mode Button or press the Shutter/Select
Button in the fourth tab.
7
8
1. Mode Menu
Here you can choose the different
video (1.1) or photo (1.2) modes. Use the Mode Button to select the various
options. Access the requested option by pressing the Shutter/Select Button. To
choose between video mode and photo mode, press the Power/Mode Button.

1.1 Video Mode:

Press the Shutter/Select Button
13
to start recording. The camera
symbol on the screen gets red while
recording. Press Shutter/Select Button
again to stop recording.

1.2 Photo Mode:

Press the Shutter/Select Button to
take a single picture.
2. Playback Video and Photo
In the playback mode you can pre-
view the videos and photos taken.
Playback Files on Camera
Make sure you selected the Video or
Photo Playback menu on the camera.
Press the Mode Button to cycle the
videos or photos, then press the
Shutter/Select Button to playback
and pause the videos. Press the
Power/Mode Button to go back.
Delete Files on Camera
Make sure you selected the Video or Photo Playback menu on the camera.
Press and hold the Shutter/Select Button for 2 seconds to delete the shown
file. Switch with the Mode Button to confirm, then confirm with the Shutter/
Select Button.
3. System Settings:
In the System Setting mode you can enter the settings for the system and
choose different parameters for the camera.
4. Return to Previous Screen
Press the Shutter/Select Button to exit the menu or press the Power/Mode
Button.
1.1
1.2
9