Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Shnd
Led
DiSP
nanu
teSt
Fhrs
7.2
Choosing the Mode
You can use the device on its own as a stand5alone unit or connect it to other similar fixtures.
Stand Alone Mode
In stand5alone mode, the device runs on one of the built5in programmes or with sound activation.
To set the device to stand5alone mode:
1.
Unplug any connection from the DMX input [4] of the device.
2.
Press MENU and choose one of the playing modes – built5in programmes or sound activation – with
UP or DOWN.
3.
Press ENTER to confirm.
4.
Choose the mode value with UP or DOWN and press ENTER to confirm.
Master/Slave Mode
The master/slave mode allows connecting several devices to a single master device. All slave devices will
then work synchronously with the master device.
Set one device to master mode and all other devices to slave mode.
1.
Unplug any connection from the DMX input [4] of the master device (the first device in the chain).
2.
Connect the DMX input of the first slave device to the DMX output [5] of the master device.
3.
Connect the DMX input of the subsequent slave devices to the DMX output of the previous slave
device.
4.
Set up the master unit as described in Stand Alone Mode.
5.
On each slave device, press MENU until <SL1> or <SL2> appears. Press ENTER to confirm.
DMX Channel Values
55channel mode:
channel
from
1
2
3
4
5
95channel mode:
channel
from
1
2
3
4
5
6
7
V. 02 – 09/03/2015
Soun
Colo
Stco
Fade
On
OFF
R
G
B
W
to
1
255
1
255
1
255
1
255
10
255
to
1
255
1
255
1
255
1
255
1
255
1
255
1
255
VDPLP608RGBW
sound control
colour changing
strobe
colour fading
LED display on
LED display off
normal or reverse display
red
green
blue
white
fixture testing
fixture working hours
description
red dimmer
green dimmer
blue dimmer
no function
white dimmer
description
red dimmer
green dimmer
blue dimmer
no function
white dimmer
master dimmer
master strobe
6
©Velleman nv
Werbung
Inhaltsverzeichnis
