Stand-Alone Mode; Remote Control; Care And Maintenance - HQ Power HQLE10049 Bedienungsanleitung

5.2 Menu
mode
mode
sound
5.3

Stand-Alone Mode

The device starts running in stand-alone mode after connection to the mains. This mode allows
you to use the device without controller.
5.4

Remote Control

Black Out
Press this button to black out the current active mode. Press again to return.
Auto
1. Press <AUTO> to enable the auto mode.
2. Press <+> or <-> to choose the different programmes.
3. Press <AUTO> to disable.
Sound
1. Press <SOUND> to enable the sound mode.
2. Press <+> or <-> to choose the different programmes.
3. Press <SOUND> to disable.
Strobe
1. Press <STROBE> to enable the strobe mode.
2. Press <+> or <-> to choose the different programmes.
3. Press <STROBE> to disable.
Speed
1. Press <SPEED>.
2. Press <+> or <-> to adjust the programme speed.
Manual
1. Press <MANUAL>.
2. Press <R>, <G> <B> or <A> to select your colour.
3. Press <+> or <-> to select the static colours.
6.

Care and Maintenance

Before starting any cleaning or maintenance activities:
1. Unplug the device's power cord from the outlet.
2. Let the device cool down.
Cleaning
Frequent cleaning is recommended to insure proper function and an extended life. The
frequency of cleaning depends on the environment in which the fixture operates: damp, smoky
or particularly dirty environments can cause greater accumulation of dirt on the fixture's optics.
V. 01 – 07/12/2020
HQLE10049
programming
Au1
Au2
So1
So2
So3
7
description
switching programme
fading programme
switching programme
fading programme
strobe programme
©Velleman nv