Sony PCWA-DE30 Kurzeinführung Seite 9

Capabilities
Wireless access to the Internet for devices with Ethernet
connector
The 2.4 GHz Wireless LAN Converter PCWA-DE30 (hereafter referred to as the
Wireless LAN Converter) is designed to allow devices such as desktop
computer or printers equipped with Ethernet connectors to become part of a
wireless network.
Only use an Ethernet cable to connect the Wireless LAN Converter to the Ethernet device.
The Wireless LAN Converter does not function as an Access Point.
When setting up the Wireless LAN Converter without the Quick Setup switch, a computer
running Windows Me, Windows 2000, or Windows XP is required.
Only one device can be connected to the Wireless LAN Converter. You cannot use a hub
to connect to several devices.
The Wireless LAN Converter also allows computers equipped with Wireless LAN
Converters to communicate directly when using the Peer to Peer Network connection
mode, without using a Wireless LAN Access Point.
The Access Point Network connection mode settings are described in this document.
Refer to Help for information about the Peer to Peer Network connection mode settings.
Configuring the Wireless LAN Converter
You can configure the Wireless LAN Converter by performing one of the
following.
With the Quick Setup switch
When the Wireless LAN Converter is connected to the Access Point PCWA-
A320, you can use the Quick Setup switch to configure the Wireless LAN
Converter.
You can use the settings of the Sony Access Point PCWA-A320 to automatically
configure the hardwired (Ethernet) Wireless LAN Converter by using the
Quick Setup switch. The Access Point send the following information to the
Wireless LAN Converter.
Network Name (SSID)
Encryption key (WEP key)
8
All manuals and user guides at all-guides.com