Sony PCWA-DE30 Kurzeinführung Seite 11

3 Connect the Power Unit to an AC outlet using the power cord.
The Wireless LAN Converter does not have a power switch.
You can use an Ethernet cable with straight-through or crossover wiring.
When the status indicator of the Wireless LAN Converter changes to white
when you connect the wireless communication device, configuration is
complete.
Configuration with the Utility Software
Procedure 1 - Verifying the computer used for setup and the
Access Point, and configuring the necessary settings
Before setting up the Wireless LAN Converter with the Converter Setup Utility,
verify the following points.
Verify the Ethernet connector of the computer used for setup and provide
the required Ethernet cable.
You can use an Ethernet cable with straight-through or crossover wiring.
Verify the Access Point
Make sure that the 2.4 GHz Wireless LAN Access Point to be used is on. Also
verify the Network Name (SSID) and Encryption (WEP) key settings of the
Access Point.
If your Access Point data encryption (WEP) is not configured, we strongly
suggest that you configure it before proceeding.
10
All manuals and user guides at all-guides.com