Sony PCWA-DE30 Kurzeinführung Seite 7

Names of parts and functions
Wireless Unit
STATUS indicator (1)
White flashing
(9 sec. lit, 1 sec. out)
White flashing
(5 sec. lit, 1 sec. out)
White flashing
(2 sec. lit, 1 sec. out)
White flashing
(1 sec. lit, 9 sec. out)
White flashing
(half second intervals)
White flashing
(0.2 sec. intervals)
Pink lit
Red flashing (6 sec.
intervals)
Red flashing (3 sec.
intervals)
Red flashing (1.6 sec.
intervals)
Red flashing (1 sec.
intervals)
6
All manuals and user guides at all-guides.com
Indicates the status of the Wireless Converter.
Wireless network connection status: good (strong signal).
Wireless network connection status: Fair (medium signal).
Wireless network connection status: Poor (weak signal).
Nothing connected to the NETWORK connector or connected
devices off.
Startup in progress.
Wait until startup is complete.
Wireless LAN Converter quick setup successful with the Quick
Setup switch.
Communicating in Peer to Peer Network connection mode.
Wireless LAN Converter quick setup failed with the Quick Setup
switch because it could not acquire setup information from the
Access Point of the PCWA-A320.
Search for wireless network in progress.
Communication is not yet possible because connection is not
established. If this condition continues for a long time, check the
settings of the Wireless LAN Converter and the connection target
(2.4 GHz Wireless LAN Access Point, etc.)
Wireless LAN Converter in Quick Setup standby mode.
Wireless LAN Converter firmware update failed. You must update
the firmware again.