Sony PCWA-DE30 Kurzeinführung Seite 15

Procedure 5 - Connecting to a device equipped with an Ethernet
connector
This procedure is unnecessary if you plan to perform a wireless
communication session with the computer used for setup. If not, disconnect
the Wireless LAN Converter from the computer used for setup and connect it
to the wireless communication device.
If you disconnect the Ethernet cable from the computer used for setup while it is still on,
wait at least 10 seconds before connecting it to the wireless communication device.
If You Change the Access Point Settings
If you change the settings of your Access Point, the connection to the Wireless
LAN Converter is severed. Reconfigure the Network Name (SSID) and
Encryption key (WEP key) of the Wireless LAN Converter to match the values
of your Access Point. If the Wireless LAN Converter is connected to the PCWA-
A320, perform procedures 2 and 3 of Configuration with the Quick Setup
Switch. If the Wireless LAN Converter is connected to a device other than the
PCWA-A320, see Configuration with the Utility Software.
If you change the Access Point settings, see If You Change the Access Point
Settings above.
If you want to reset the Wireless LAN Converter, see Reset to Factory
Defaults above.
For details about the Wireless LAN Converter setup, refer to the Help.
To display Help, proceed as follows:
Click Start, point to Programs (All Programs in Windows XP), point to
Wireless LAN, and then click Converter Setup Help.
14
All manuals and user guides at all-guides.com