hanseatic HKS8555GDW Gebrauchsanleitung Seite 62

Page EN-26 Getting started
NOTICE
Risk of damage!
If the cooling appliance has been trans-
ported horizontally, lubricant from the
compressor may get into the cooling
circuit.
■ Allow the appliance to stand upright
for approx. 2 hours after transport
and before connecting. This allows
the lubricant enough time to fl ow
back into the compressor.
• Insert the mains plug into an easily ac-
cessible and properly installed socket
(220–240 V~ / 50 Hz). The interior light (2)
switches on and off automatically when the
appliance door (3) is opened and closed.
You will find all important information
about operation from page EN-12.