Replacement Parts - Pulmodyne BiTrac HC Bedienungsanleitung

Replacement Parts

Part No Description
1 313-9145 Forehead Pad Assembly
2 313-9143 Silicone Forehead Pad
3 313-9146 Head Strap with 4 clips (Black)
4 313-9140 Nasal Mask Cushion w/Snap Ring
Adult Extra Large
313-9139 Nasal Mask Cushion w/Snap Ring
Adult Large
313-9138 Nasal Mask Cushion w/Snap Ring
Adult Medium
313-9137 Nasal Mask Cushion w/Snap Ring
Adult Small
5 313-9132 Nasal Mask Cone w/Vented Elbow 22mm Male,
Adult Extra Large
313-9131 Nasal Mask Cone w/Vented Elbow 22mm Male,
Adult Large
313-9130 Nasal Mask Cone w/ Vented Elbow 22mm Male,
Adult Medium
313-9129 Nasal Mask Cone w/ Vented Elbow 22mm Male,
Adult Small
6 313-9142 Head Strap Clip (4 per pack)
7 313-9141 Silicone Cap Strap (2 per pack)
Assembly
Replacement Of Head Strap
1. Attach the clips on Head Strap with the wider web section to the upper part of mask first.
2. Slide the Head Strap on mask over your head and adjust length to a comfortable tightness.
3. On lower part of Head Strap connect both clips to mask and adjust to a comfortable tightness.
4. To remove and reattach mask daily, disconnect and reattach one of the lower clips.
5. Make sure tubing is securely attached and turn on airflow.
1
2 3