Troubleshooting - Block BB-200 Bedienungsanleitung

Error Messages and General Troubleshooting
Error Description
No power even though the
unit is on
No sound
Loud buzzing
Distorted sound
The remote does not work
Keys do not work
(Device or remote control)
Fault in reception
Network connection is not
possible
!
Repairs and interventions in the device may only be carried out by authorized persons. Quali-
fied personnel are made.
60
Possible cause and remedy
- The power cable is not connected
- The socket is defective
- The fuse in the device is defective - Fault must be repaired by a technician
- The power cable is defective
- The unit is not on at all
- The volume is too low
- No input signal
- The wrong input is set on the device
- Your unit is too close to another unit or TV
- Volume, bass or Treble are set too high
- Speakers may be defective
- There is a bridge (short circuit) on the loudspeaker cable
- Make sure that the batteries are inserted correctly
- Are the batteries empty? Please replace them with new ones
- Point the remote control at the receiver on the unit
- Remove all objects between the remote control and the unit
- Determine if the distance between the FB and the device is more than 8 meters
- Turn the unit off and then on again.
- Alternatively, remove the device from the power and then reconnect it.
(The device can be influenced by external power interferences)
- The station is not set correctly
- The antenna is not properly aligned
- Restart a station search
- The network is currently unavailable. Please try again later
- The router does not allow any port, since the device is not yet Address. Start the
network wizard
- Check the distance between the router and the device
- Change the selected encryption method of the router
- Determine whether a firewall rejects the device
- Check, if used, the network cable