Assembling The Device - Block BB-200 Bedienungsanleitung

Assembling the device

Connect the FM / DAB + cable antenna to the device.
▶
▶ If you need additional input sources such as from the tape deck, TV, DVD player, satellite recei-
ver, connect these devices to the corresponding input jack of the BB-200 using suitable cables.
For this purpose, you have two analogue inputs (TV & AUX) and three digital grounding cables
(2x optical and 1x coaxial) are available. In addition, an analogue line-in connection is also provided
at the front.
▶ When using an external device to record the signal sources of your BB-200, please connect this unit to
the REC-OUT jack. This output emits an unregulated signal without volume control or sound regulation
from the BB-200.
▶ If you want to use another (high end) amplifier or an active subwoofer on the BB-200, please connect
it to the pre-out jacks of the BB-200. This output emits a signal from the BB-200 influenced in volume
and tone control.
▶ When connecting your BB-200 wireless over an existing WLAN to the Internet, please install the sup-
plied WLAN aerial.
▶ When connecting your BB-200 to the Internet via Ethernet (wired), please connect your router using the
RJ-45 cable to the Ethernet socket of the BB-200.
▶ Connect the power cable to the device and to a power outlet.
42