General Instructions; General Information - Thermic Energy EPS 1000 Montage- Und Bedienungsanleitung

GENERAL INSTRUCTIONS

1. Regulatory Guidelines
The assembly is based on the site conditions and must be carried out according to engineering
standards. The local regulations must be observed. The following regulations should be given spe-
cial consideration:
> DIN 18380 Heating Systems and Central Water Heating Systems
> DIN 18381 Gas, Water and Sewage Installation Systems
> DIN 18382 Electronic Cable and Power Systems in Buildings
> DIN 1988 T 1-8 Technical Rules for Drinking Water Installations
> DIN 4751 Safety Equipment for Heating Systems
> DIN 4753 Water Heaters and Water Heating Installations for Drinking Water
> DIN 4757 T1-4 Solar Heating Systems / Solar Thermal Systems
> VDE 0100 Installation of Electrical Equipment
> VDE 0105 Operation of Electrical Installations
> VDE 0190 Main Potential Equalisation of Electrical Systems
2. Tools Required
> Flat collet / pipe wrench
> Open-end spanner for hydraulic fittings
> Flat screwdriver / Phillips screwdriver
> Transportation tools
> Installation tool for the water and heating connection
3. Supplementary Materials
> Sealing material (hemp or similar)
> Fittings for water and heating connection (transitions, fittings, etc.)
26