AEG RTB411E1AW Benutzerinformation Seite 78

78 www.aeg.com
14. Screw the remaining 2 screws on the
top side of the appliance with no
hinge.
15. Place the top cover on the appliance
and tighten the screws on the back.
Install the door equipment.
Wait at least 4 hours before connecting
the appliance to the power supply.
3.7 Reversing the freezer
compartment door
WARNING!
Before carrying out any
operations, remove the plug
from the power socket.
1. Close the freezer compartment door.
Unscrew the screw of the installation
button. Place the installation button
and the screw in a safe place.
2. Open a freezer compartment door
slightly. Pull down the freezer
compartment door and the cap from
the door upper bearing.
3. Remove the installation buckle and
install it on the opposite side.
4. Reverse the freezer compartment
door by 180 degrees. Install the cap
on the door upper bearing.