Safety Information - SystemRoMedic MiniLift200 Gebrauchsanweisung

Safety information

Visual inspection
• Inspect the packaging for any damage.
• Check for correct product being delivered.
• Inspect lift functions regularly.
• Check to ensure that material is free from damage.
Before use
• Check if all the parts/components are included in the packaging.
• Check if all approved accessories are included in the package.
• Check if Product Quality Approval document is included in the packaging. Save this document for future contact
with manufacturer.
• Make certain the lift is properly assembled.
• Check lifting function and base-width adjustment.
• Check driving function in all directions.
• Check sling bar connection and safety latch function.
• Check to ensure that the quick-connecting locking pin for the actuator is correctly installed.
Assembly of MiniLift200
Check to ensure that all components are included:
Lift unit, control box and battery pack, undercarriage and base-width adjustment motor, footplate, leg support, hand
control and cord, manual and charger.
HS
M1 M2
PUSH HOLD 2 sec
1
PUSH HOLD 2 sec
2
4
Connect cables: Hand control cord in HS, cable to lift unit on mast in outlet
M1, and cable to base-width motor in outlet M2.
Safety Switch Label: Select a label in a suitable language informing on
how to reset the Safety Switch. Attach the label on the upper side of
the lifting arm.
I F U