Herunterladen Inhalt Inhalt Diese Seite drucken

Safety Instructions - GEL BABY 13 Bedienungs- Und Wartungshandbuch

Entkalkungspumpen
Vorschau ausblenden Andere Handbücher für BABY 13:
Inhaltsverzeichnis

Werbung

6 - SAFETY INSTRUCTIONS

-
Before installing the motor pump, make sure the power supply is
fitted with grounding and complies with the regulations.
-
Except for the models Baby 13 – Boy C 10 – Boy C 15 Super – Boy
C 20 – Boy C 30, the other pumps must never run dry.
-
Avoid using the pump in places where there are liquids, gases,
flammable powders or risk of explosion.
-
Before plugging in the pump to the outlet, make sure the switch is off.
-
The outlet must be suitable for the plug of the pump. Do not use non
CE-marked defective outlets.
-
Use (CE) approved extensions, only if necessary.
-
Do not use plug adapter. Do not carry out any modifications to the
plug nor to the electrical cable.
-
Pump shall always kept in perfect efficiency.
-
During maintenance operations, check the switch is off and the plug
is not connected.
-
All maintenance operations must be carried out by the authorized
Technical Assistance Service.
-
Only use GEL original spare parts.
-
Do not carry out any modifications to the pump if not authorized by
GEL Technical Department (ask for written authorization).
-
The warranty is not valid if the pump is repaired by personnel not
authorized by the manufacturer, that also means operating with
unsafe and potentially dangerous equipment.
-
Keep children and unauthorized persons away from the pump.
-
Keep the pump out of reach of children and unauthorized persons.
-
Do not use the pump if tired or under the effect of alcohol, medicines
or drugs, do not eat or smoke.
-
When using the pump, wear overalls, do not wear jewellery, keep hair
away from the pump.
-
When handling descaling liquids, be very careful. It is necessary to use
Individual Protection Equipment (IPE).
7 - CHEMICALS
BOILER CLEANER D.E. Concentrated
descaling liquid with powerful reaction for
systems and heat exchangers
.
BOILER CLEANER D.P. Concentrated
descaling liquid (non-fuming), with
degreasing action, for systems and heat
exchangers.
BOILER CLEANER P. Concentrated
descaling powder (non-corrosive,
non-fuming) for systems and heat
exchangers.
BOILER CLEANER P.Z. Concentrated
descaling powder (non-corrosive,
non-fuming) for systems and heat
exchangers, with special zinc inhibitor.
BOILER CLEANER E. Concentrated
descaling liquid with very powerful
reaction for systems and heat
exchangers.
BOILER CLEANER L.Z.
Concentrated descaling liquid (non-
corrosive, non-fuming) for systems
and heat exchangers, with special zinc
inhibitor.
BOILER CLEANER ECO
Ecological descaling liquid for heating
systems and heat exchangers.
BOILER CLEANER N
Neutralizing powder to remove residual
acidity after descaling systems and heat
exchangers. Also suitable for neutralizing
descaling chemicals after use, thus
making it possible to drain them.
• •
• •
• • • • •
• • • • • •
• • • • • • • •
• •
• • • • • • • •
8 - THE PUMPS
The exploded views with the descriptions of the components
and the item codes of the spare parts are on pages
9 - WARRANTY TERMS AND AFTER-SALE
ASSISTANCE CONDITIONS
GEL guarantee that the equipments sold are free from designing, manu-
facturing and material defects, under normal operating conditions and
according to the directions contained in the instructions manual supplied
with the equipment.
In compliance with the directive 1999/44/CE valid in the EEC countries,
the warranty rights apply only to the purchaser. The warranty supplied by
GEL leaves these rights unprejudiced.
GEL S.p.A., placed in Via Enzo Ferrari, 1 Castelfidardo (AN) – Italy, gua-
rantee the equipments against any conformity defects appearing within
24 (twenty-four) months from the purchase date, even when warranty
operations have been carried out during this period, if only proved by a
document.
The warranty covers all components of the equipment and provides for
the repairing or, if necessary, the free replacement of those parts that,
according to your Dealer, have conformity defects.
The warranty does not cover the aesthetic parts and the parts subject
to wear and tear, nor does it cover all damages or failures whose cause
is not due to the manufacturer, such as: transport, wrong installation
or maintenance, tampering, sudden changes of electric voltage and/or
hydraulic pressure, thunderbolts, corrosions, excess of humidity, acciden-
tal bumps or events beyond our control.
The warranty is valid only if the equipments have been installed, used
and properly maintained according to all directions supplied by GEL in the
instructions manual attached to the equipment.
Should any conformity defects of the product be found during the warran-
ty period, the Customer shall notify the Dealer to agree upon the terms of
repairing and/or replacing of the product.
The after-sale assistance service under warranty is always supplied by
your Dealer.
Claims.
For claims, please contact your dealer.
32-59.
7

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis