Safety Instructions - GEL BABY 13 Bedienungs- Und Wartungshandbuch

6 - SAFETY INSTRUCTIONS

- Before installing the motor pump, make sure the power supply is fitted with grounding and
complies with the regulations.
- Except for the models Baby 13 – Boy C 10 – Boy C 15 Super – Boy C 20 – Boy C 30, the other
pumps must never run dry.
- Avoid using the pump in places where there are liquids, gases, flammable powders or risk of
explosion.
- Before plugging in the pump to the outlet, make sure the switch is off.
- The outlet must be suitable for the plug of the pump. Do not use non CE-marked defective outlets.
- Use (CE) approved extensions, only if necessary.
- Do not use plug adapter. Do not carry out any modifications to the plug nor to the electrical cable.
- Pump shall always kept in perfect efficiency.
- During maintenance operations, check the switch is off and the plug is not connected.
- All maintenance operations must be carried out by the authorized Technical Assistance Service.
- Only use GEL original spare parts.
- Do not carry out any modifications to the pump if not authorized by GEL Technical Department (ask
for written authorization).
- The warranty is not valid if the pump is repaired by personnel not authorized by the manufacturer,
that also means operating with unsafe and potentially dangerous equipment.
- Keep children and unauthorized persons away from the pump.
- Keep the pump out of reach of children and unauthorized persons.
- Do not use the pump if tired or under the effect of alcohol, medicines or drugs, do not eat or smoke.
- When using the pump, wear overalls, do not wear jewellery, keep hair away from the pump.
- When handling descaling liquids, be very careful. It is necessary to use Individual Protection
Equipment (IPE).
25