Dold RE 6909 Betriebsanleitung Und Datenblatt Seite 14

Safety Notes
!
Attention!
• Check the safety function after each putting into operation, each exchange
of components, longer standstills and each fault.
• In case of malfunctions or damaging the enabling switch must be replaced.
The device may only be repaired by the manufacturer.
• The equipment must be checked, maintained and replaced depending
on the intensity of operation.
• The equipment must be regularly checked and maintained by a trained
staff. Observe the applicable regulations for this purpose. The check
includes the complete subystem and not only individual components, at
least all functionalities that are actually involved in the safety function.
• Dirt must be removed regularly. Use a wet cloth for this purpose. Avoid
contact with abrasive cleaning products or other aggressive chemicals.
• Do not expose the device to strong water jets or high-pressure/stream
jets. Avoid temporary or permanent immersion. The IP protection class
applies to water, avoid contact with other liquids.
• Do not disassemble or modify the enabling switch.
You, as the installer of the machine or plant, must make clear reference to
these safety instructions in the relevant operating manual.
14
RE 6909 / 17.11.21 en / 470A